磁性多孔陶粒生物膜反应器处理焦化废水的试验研究

以磁性材料为原料,经过特定的工艺处理,对多孔陶瓷进行磁化改性获得磁性多孔载体,并将该载体应用于生物膜反应器中进行焦化废水处理试验。对不同类型的多孔陶粒载体进行对比试验,结果表明:磁性载体生物膜反应器对COD、NH3-N的去除率比普通活性污泥法高出25%³0%,比非载体生物膜反应器高出15%30%,比非载体生物膜反应器高出15%²0%左右。反应器的曝气量为1.5 L/h,曝气时间为10 h/d,温度为2520%左右。反应器的曝气量为1.5 L/h,曝气时间为10 h/d,温度为25³0℃。焦化废水经磁性载体生物膜反应器处理后,上清液中COD,NH3-N的去除率均在90%左右。出水浓度达到国家工业废水排放二级标准(GB18918-2002)。     

AO一体化改良工艺在北方城镇中小型污水处理厂的应用优势

北方城镇中小型污水处理厂进水的水质、水温变化较大,冬季水温在12℃以下,低温对氨氮去除效果有明显影响。根据几种传统生物法污水处理工艺的比较表明,CASS工艺比较适合城镇中小型污水处理厂。为研究出比CASS工艺更适合北方中小城镇污水处理厂的工艺方法,以宁安市污水处理厂为研究对象加入悬浮填料技术并对传统AO工艺进行改造．在污染物去除率、占地面积、工程造价生产成本方面与CASS工艺进行比较。其中,COD和NH3-N污染物去除率分18℃和40℃水温两个周期进行检测对比。以上比较结果为北方城镇中小型污水厂的工艺选择及优化运行提供技术支持及理论依据。     

牛粪厌氧发酵的载体筛选试验研究

为了提高厌氧发酵装置的效率，人们研究了各种各样的方法和措施，其中应用填料或载体使生物菌能够延长驻留期是其中的方法之一，开展载体筛选及其结构设计在厌氧发酵装置中的试验，有助于对此问题的深入研究以及将其成果应用于生产实践。通过静态载体筛选试验选择了玻璃纤维作为载体、PVC塑料管作为载体骨架制成的装置在动态序批式厌氧发酵装置中进行了试验。结果表明：此载体骨架结构对于牛粪动态厌氧发酵具有明显的提高产气效率、改变产气质量和促进有机物转化为挥发性脂肪酸的作用。     

1/f噪声源与其在半导体器件可靠性评估中的应用

1／f噪声，由于其能够反映器件的质量与可靠性参数，其研究受到重视。本文首先较为系统地介绍了1／f噪声源两种较为成熟的理论：迁移率涨落模型和载流子涨落模型，最后介绍了几个1／f噪声与半导体器件参数漂移相关的实例。     

Processing and Properties of Mixtures of PHB-V with Post-consumer LDPE

Mixtures of poly-β-(hydroxybutyrate-co-valerate) PHB-V with virgin and post-consumer low density polyethylene (LDPE) were prepared by melt mixing in proportions of 100/0, 90/10, 80/20, 70/30 and 0/100 (wt/wt%). The mixtures were analysed by infrared spectroscopy, differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA), melting flow index (MFI), tensile tests, scanning electron microscopy (SEM) and biodegradation in simulated soil. The DMTA and DSC curves of post-consumer LDPE suggested that this polymer was a mixture of LDPE and linear low density polyethylene (LLDPE). Virgin and post-consumer LDPE had lower MFI than PHB-V, but the blends showed higher index as the content of LDPE increased. The addition of LDPE reduced the tensile strength and Young’s modulus of the mixtures compared with PHB-V. SEM indicated poor interfacial adhesion between PHB-V and LDPE. PHB-V degraded slow and gradually, while both LDPE showed virtually no degradation under the conditions studied. The biodegradability of the blends depended on their composition and of the type of LDPE. LDPE improved the biodegradability of the mixtures.     

Enhancing anoxic denitrification of low C/N ratio wastewater with novel ZVI composite carriers

External organic carbon sources are needed to provide electron donors for the denitrification of wastewater with a low COD/NO₃^--N（C/N） ratio, increasing the treatment cost. The economic strategy is to enhance the bioactivity and/or biodiversity of denitrifiers to efficiently utilize organic substances in wastewater. In this study, novel zero-valent iron（ZVI） composite carriers were prepared and implemented in a suspended carrier biofilm reactor to enhance the bioactivity an...     

生态沟渠-生物滞留池组合控制农村径流污染

生态沟渠和生物滞留池因其良好的径流污染控制能力和生态效益,日益受到广泛关注和应用,但单一的生态沟渠或生物滞留池在农村径流污染控制中常存在氮磷去除效果不稳定和基质易堵塞等问题.将两者串联构建组合系统,利用生态沟渠预处理去除部分污染物,可降低生物滞留池污染负荷和减轻基质堵塞;同时在生物滞留池中设置淹没区并添加天然载体碳源提升系统脱氮效果.研究了载体碳源、降雨强度和干湿交替等条件对生态沟渠-生物滞留池组合系统控制农村径流污染的影响.结果表明,投加稻草和木屑两种天然载体碳源分别将生物滞留池段的TN去除率提升19.9%和20.4%.模拟降雨强度从小雨增至大雨时,外加碳源组合系统COD、 NH⁺₄-N、 TN和TP去除率平均下降17.0%、 16.8%、 20.4%和17.2%,其中生态沟渠段对4种污染物的去除贡献平均降低16.3%、 13.0%、 24.2%和22.1%.干湿交替运行可提高系统的污染物去除效果,相较连续进水,干旱3周后木屑组TN平均去除率提升12.3%.微生物群落分析结果显示,木屑组和稻草组生物滞留池样品的α多样性高于对照组;投加载体碳...     

聚乙烯微塑料的微生物降解研究进展

现代工业的发展使得塑料制品的使用量急剧增加,由此产生的大量废旧塑料垃圾在环境中裂解形成粒径更小的微塑料（<5 mm）.由于微塑料结构稳定,分布广泛且生物可利用性低,在环境中长期存在,已经逐渐成为对海洋生态和环境造成巨大影响的重要污染物.近年的研究表明,自然环境中存在一些能降解这些难降解微塑料的微生物,微生物降解无二次污染且对环境扰动少,在微塑料的去除中具有很好地应用潜力,但亦有一些局限性.综述了环境中数量最多的聚乙烯微塑料的微生物降解研究现状,着重探讨了降解效果和量化方法.基于微塑料生物分解效率普遍较低的现状,开展进一步的研究还非常有必要.     

An Experimental Study on the Treating River Sewage with New Bioreactor

A new bioreactor on the basis of a dynamic fluidized bed was designed, which combines advantages of the fluidized bed and a biological contactor. The experiments of start up, normal operation and parameter adjustment are carried out. The results show that the bioreactor can be quickly started up in the condition that the fill is 50%, the hydraulic retention time is 72 min, aerate speed is 2.5 m3/h, rotation-cage rotated speed is 1.5 r/min, and the removal rates of chemical oxygen demand （CODcr） and Ammonia nitrogen （NH3-N） are 75.34% and 80.98% respectively. The influence of the operation parameter on removal rates of the bioreactor is analyzed, and an appropriate operation parameter is provided.     

Law of variation for low density polyethylene dust explosion with different inert gases

To reveal the effects of different inert gases on explosion characteristics during low density polyethylene (LDPE) dust explosion and optimize the explosion-proof process, eight N₂ (CO₂)/air mixed inerting conditions were experimentally studied. Typical inerting conditions with 12 L cylindrical explosive tank were used to study the characteristics on the flame propagation. The thermogravimetric analysis with related theories were used to further explain the mechanism and quantities in low density polyethylene (LDPE) dust explosion with different inert gases. The results showed that the reduction of O₂ concentration could effectively delay the progress of flame growth process and weaken the effect of dust combustion reaction. The flame growth process of condition (N₂/air (18% O₂)) was 2.05 times slower than that of the non-inert condition. The explosion strength was obviously reduced, and the characteristic parameters such as explosion pressure and flame propagation speed were also affected by the decrease of O₂ concentration. For LDPE powder, the smaller the median diameter, the greater the explosion intensity and the lower the limiting oxygen content (LOC). The LOC with CO₂ was usually higher than that with N₂ and the effect of CO₂ was significantly better than N₂ in inerting.